Classic GH Series
- Hydraulically Operated Proportioner
- Passive Hydraulic System
- Opposed Piston Metering Pumps
- New Pump Base Design
- Digital Automatic Temperature control for superior
- control of material processing
- Open Frame Design
- Relay Logic Control
- Heater Options, Pressure Ranges and Ratio options to process most Foam and Coatings
- Automatic ISO Lube System
- Hose Heat Tap Setting
|Output||25lbs/min||1.3 gallons/min||40lbs/min||2.5 gallons/min|
|Max. Working Pressure||2000 PSI||3000 PSI||2000 PSI||3500 PSI|
|Max. Hose Length||310 ft||310 ft||410 ft||410 ft|
|Heater Wattage||8kW, 10kW, 12kW||8kW, 10kW, 12kW||8kW, 10kW, 12kW||8kW, 10kW, 12kW|
|Hose Heating Power||90 Volts||90 Volts||120 Volts||120 Volts|
|Maximum Fluid Temperature||190° F||190° F||190° F||190° F|
|Weight (w/o Hydraulic Fluid)||520 lbs||520 lbs||520 lbs||520 lbs|
|Electrical @ 8kW Heaters||27 amps @ 3x230V60 amps @ 1x230V||27A @ 3x230V, 60A @ 1x230V||N/A||N/A|
|Electrical @ 10kW Heaters||35 amps @ 3x230V70 amps @ 1x230V||34A @ 3x230V, 70A @ 1x230V||N/A||N/A|
|Electrical @ 12kW Heaters||43 amps @ 3x230V80 amps @ 1x230V||43A @ 3x230V, 80A @ 1x230V||N/A||N/A|
|Electrical @ 15kW Heaters||N/A||N/A||80A @ 3x230V, 130A @ 1x230V||80A @ 3x230V, 130A @ 1x230V|
|Electrical @ 18KW Heaters||N/A||N/A||43A @ 3x230V, 80A @ 1x230V||43A @ 3x230V, 80A @ 1x230V|
|Electrical @ 21kW Heaters||N/A||N/A||43A @ 3x230V, 80A @ 1x230V||43A @ 3x230V, 80A @ 1x230V|
The PMC Classic Series GH was designed with the customer in mind, to provide applicator friendliness and serviceability to meet today’s market demands.
Hydraulically Operated Proportioner: Passive hydraulic system provides a rugged, consistent and long lasting power train as the drive mechanism for this plural component proportioning system.
Opposed Piston Metering Pumps: The horizontal configuration of these in-line metering pumps helps to eliminate uneven loading during the pumping cycle. Provides minimal fluctuations in spray pressures.
New Pump Base: The newly-designed pump bases ensure pressure stability throughout the cycle and provide user friendly access for preventive maintenance.
Digital Automatic Temperature Control: Digital controllers allow operators to precisely program the set temperature to suit the chemical system being used. Used in concert with the Newly Designed PMC Temperature Sensing Unit (TSU), the Classic Series will provide accurate and consistent Hose Heat to insure the most effective yield for your product under varying conditions.
Open Frame Design: Allows the operator full view and easy access to all the critical components of the proportioner.
Relay Logic Control: Point to point wiring in series with relays and circuit breakers minimize the use of printed circuit boards in all control functions.
Heaters: The GH Series is available with two mass aluminum heaters per unit; configurations ranging from 8,000 total watts (4,000 per side) up to 21,000 total watts (10,500 per side).
Ratio: Standard Classic units are sold with a 1:1 Ratio. Various size pumps are available to switch volume ratio range from 1:1 to 3:1.
ISO Lube System: Standard on all GH series units to help flush the ISO pump shaft resulting in longer seal life. Heater Tap Settings: Standard terminal block tap settings for your particular hose length.